Adhesive sealant ADHESION Glas1 is a one-component, ultra-fast curing, flexible and high performance polyurethane adhesive for the bonding of vehicle glass direct glazing. It is specifically designed to give a fast and safe drive-away time on vehicles fitted with airbags. Particularly fast skinning and curing time.
Fit the cartridge into a manual or pneumatic air operated gun (provided with telescopic piston). The surfaces to be treated should be perfectly clean, dry and free from dust and grease. It is necessary to apply ADHESION Glas1/ACTIVATOR ADHESION and PRIMER ADHESION 30 on glass. The adhesion on normal vehicle varnishes generally does not require the use of primer. It is advisable to carry out preliminary adhesion tests on the support. Specific guidance regarding the use of primers may be obtained by submitting substrate samples to our laboratories.
Alu-cartridge 310ml: 12 cartridges per box
Alu- bags 600 ml: 20 bags per box
ADHESION Glas1 can be stored for 12 months in its original packaging (unopened container) at 10°-25°C in a cool, dry place. The storage temperature should not exceed 25°C for extended periods of time. Keep away from wet areas, direct sunlight and heat sources.
The information contained in this technical data sheet is to the best of our knowledge correct, being based on our knowledge and experience to date and cannot be used as a guarantee, due to the various different materials present on the market and the fact that the application conditions are not under our direct control and supervision. We, however, guarantees constant product quality. We, have the right to modify or up-date this technical data sheet according to requirements. Customers are kindly requested to verify that they are in possession of the latest version.
Certificate of state registration № BY.70.71.01.008.E.000581.07.15 from 16.07.2015
ALWAYS CONSULT THE MATERIAL SAFETY DATA SHEET BEFORE USING THE PRODUCT.
Purposely designed for bonding windscreens, side and rear windows to passenger cars, trucks, tractors and special vehicles. Adhesive sealant ADHESION Glas1, is also used for bonding fibreglass reinforced plastic elements (roofs, side and frontal panels) on vehicles. ADHESION Glas1 is indicated in all applications where a strong elastic-structural bonding to elements of different compositions (metal sheets, fibreglass and reinforced plastic) is necessary and that undergo a strong mechanical or thermal stress.
• One-component polyurethane
• Rapid application and curing
• Suitable for cold application
• Good stability/workability – no sag
• Short cut-off string
• high shear modulus
• Non-conductive; low volume resistivity
• Suitable for use with integral aerials.
• Prevents contact corrosion in aluminium-body vehicles.
Appearance / Thixotropic paste
Colour - Black
Chemical nature - Polyurethane
Curing Mechanism - Moisture-curing
Curing through volume (1 day 23°C and 50% r.h.)[mm] 4
Shore A (23°C and 50% r.h.) 55
Density [g/cc] 1,36 0,02
Tack-free time (23°C and 50% r.h.)[min] 15
G modulus at 10% [N/mm2] ≥ 2.0
Tensile strength (ISO 37 DIN 53504)[N/mm2] ≥ 9,0
Elongation (ISO 37 DIN 53504)[%] ≥ 300
Electrical volume resistivity [Ω•cm] 1 x 109
Application temperature [°C] from +5 to +40
Temperature Resistance [°C] -40/+100, for short period up 140
Drive Away Time: 2 hour (throughout operating window of –5°C to +40°C) 3
On vehicles fitted with both driver and passenger airbags
Adhesive sealant ADHESION Glas1 meets Federal Motor Vehicle Safety Standards and all long term durability requirements according to the full range of N.P.T laboratory and Crash Test Data.