ADHESION
(+375 17) 3 500 222
(+375 29) 3 670 670
(+375 17) 3 500 333
klei2007@mail.ru

Professional adhesive and sealant products, industrial and building special materials and compounds


Anaerobic Anaterm-102T is designed for bonding and sealing of flat and smooth cylindrical (landing) compounds.

Clay is different at high speed curing and high tearing strength.

Anaterm-102T is a viscous homogenous liquid capable of long-term stay in the initial state in the presence of oxygen and cure rapidly in a narrow gap between the bonding surfaces to form a strong adhesive bond.

Anaterm-102T requires the use of an activator of K-101M on all surfaces, or cures upon heating.

It is used for bonding of various materials: metal, glass, laminated glass, ceramics and some plastics.

Details before applying the adhesive must be degreased and cleaned of contaminants. After degreasing parts are dried to evaporate the solvent.

Physical and mechanical properties

Indicator Anaterm-102T

Appearance Homogeneous liquid from light yellow to brown

Vyazkost.106 Kinematic at 20 ° C, m2 / s 1500-2300

Tensile strength at break, MPa, not less than 20-25 ° C during 24 hours with the activator

at 120 ° C over 2 chasa

20

20

Ready for use at 20-25 ° C, 5-12 hours

Pot life at 60 ° C, h, at least 2

Operating temperature range, ° C -60 ... + 150

The maximum gap of 0.2 mm

Note: the material used in the feature that its curing occurs only in a certain clearance on the free surface of the adhesive is not cured (that is not married), and removed using rags.

Precautionary measures:

Keep away from food at temperatures from +5 to + 30 ° C, protected from direct sunlight and dirt ingress into the vial.

After contact with the sealant on the skin, wash it off with soap and water.

The sealant is ready for use, has a long pot life when stored.

It supplied in plastic bottles.