ADHESION
(+375 17) 3 500 222
(+375 29) 3 670 670
(+375 17) 3 500 333
klei2007@mail.ru

Professional adhesive and sealant products, industrial and building special materials and compounds


Anaerobic gasket

Anaterm-505

TU 2257-331-00208947-2002

Anaerobic gasket Anaterm-505 is designed to seal and sealing fixed detachable connections (flanges, flat joints, threaded connections) and to replace the currently in use paronitovye, cardboard and liquid gaskets silicone based.

Anaterm-505 is filled with a thixotropic composition that can remain for a long time in the initial state and rapidly solidified in gaps between metallic surfaces.

SPECIFICATIONS

Brookfield apparent viscosity at a temperature of (25,0 ± 0,2) ° C (A / 6/20) with 15,000-25,000 mPa •

Brookfield apparent viscosity at a temperature of (25,0 ± 0,2) ° C (A / 6/20 or A5 / 2), with mPa • 80000-100000

Ultimate tearing strength in the steel samples 45 ST or aluminum alloys, MPa

• after 3 hours no less 2

• 24 hours, at least 9

Setting time on steel samples of ST 45 or aluminum alloys, minutes 20-40

Ready for use at 20-25 ° C, 3-8 h

The maximum gap of 0.4 mm

Operating Temperature, ° C -60 ... + 150

 Anaterm-505 works in the various media, including in the engine oil, diesel fuel, gasoline, antifreeze.

The high cure rate Anaterm-505 allows you to use it on the conveyor production in the assembly of engines and other vehicle components.

The product is ready for use, is applied on previously degreased surface.

Anaterm-505 is supplied in plastic tubes, bottles or jars of 200 g.

Guaranteed shelf life of 1 year.