ADHESION
(+375 17) 3 500 222
(+375 29) 3 670 670
(+375 17) 3 500 333
klei2007@mail.ru

Professional adhesive and sealant products, industrial and building special materials and compounds


Lubrication Siners-V Lubrication is designed for use in technological processes with cold metal forming: punching, calibration drawing, rolling, etc. 

Operating temperature range for the lubrication "Siners-V" from 10 to 70°C, briefly up to 100°C. 

Siners-V " plastic lubricating grease, which is a smooth homogeneous ointment from white to yellow synthetic, water-soluble. 

Lubrication is applied to the surface of the blanks in various ways: by spreading by brush, roller, feeding centralized lubrication system. Upon completion of the molding product grease residues from the surface of the metal can be easily removed by washing with tap water (preferably soft) without the use of organic solvents and technical detergents. 

After drying, the metal surface is ready for coating applications. 

Lubrication "Siners-V" passive corrosion. Details covered with lubricant, stored for several months without signs of corrosion under normal industrial conditions (temperature of 10-30oC, humidity up to 90%). 

The viscosity of the lubrication in storage increases (perhaps fibering), but it is easy to return to the viscous fluid state with stirring means at hand (spatula, paddle, auger mixer, building a vibrator). 

The density of the lubricant is 1,12-1,15 g /cc., The viscosity can vary in the range 10-100 Pa·s (100-1000 Cm), depending from the content the thickener. Lubrication with a certain viscosity can be produced on request. 

Waste lubrication biologically degradable and after dilution amenable to biological treatment. lubrication solutions in water at concentrations of 5-15% can be used as coolants. 

Lubrication explosion-proof, non-toxic, there is a sanitary-epidemiological conclusion. No cases of skin irritation when working with lubricant were noted. Persons working with lubricant, use cotton clothing and gloves. In case of contact lubrication with skin it should be washed off with water.