Anaerobic Anaterm-110 is designed for the bonding of metals, glass, ceramics, glass, some plastics and various combinations of these materials.

Clay is different at high speed curing and high tearing strength.

Anaterm 110 consists of two components A and B. Components A and B separately applied to the bonding surfaces in equal proportions by volume.

complete curing of the adhesive joint time at a temperature of 20 ° C is 24 hours.

Temperature range operation "Anater-110" is from -60 ° C to + 150 ° C.

Details before applying the adhesive must be degreased and cleaned of contaminants. After degreasing parts are dried to evaporate the solvent.

Physical and mechanical properties

Indicator Anaterm 110

Appearance: Component A

                        component in a homogeneous red liquid

Homogeneous liquid blue

Vyazkost.106 Kinematic at 20 ° C, m2 / 425 - 1125

Relative viscosity-1, with

30-80

Setting time on steel samples 12X18H10T, no more than 90

Tensile strength at breakage on 2h18N10T steel samples at a temperature of 20-25 ° C, MPa, no less:

                                                     3 min

                                                     after 8 hours

                                                     24 h

0.5

5.0

30.0

The adhesive is ready for long-term viability in storage.

It supplied in plastic bottles of 100 g, 200 g and 3.4 g blister pack