Glue Anaterm-105
DIRECT USE: for bonding of metals, glass, ceramics, glass, some plastics based on styrene, as well as various combinations of these materials in a production environment.
Conditions of use
- Recommended the gap to 0.1 mm;
- The permissible gap to 0.3 mm.
Special features
shockproof
vibration-resistant
bonded materials with different thermal expansion
temperature range
- Operation from -60 ° C to + 150 ° C
- Briefly + 200 ° C (1 hour)
Mixing ratio
By volume, part (A) and part (B) 1: 1
The properties of the liquid material
Chemical base acrylic monomer
Appearance (A / B) Transparent red / green liquid
The dynamic viscosity of 1500-3000 mPa • s
flash-point
COC (A / B)> 87 ° C /> 100 ° C
Flash point (A / B)> 87 ° C /> 100 ° C
Autoignition Temperature (A / B)> 348 ° C /> 357 ° C
Curing time at 20 ° C: - no more than 3 minutes (setting)
- 24 hours (full cure)
Properties of the cured material
Tensile strength steel specimens 12X18H10T
When separation after 24 hours not less than 30 MPa
Shear after 24 hours not less than 20 MPa
When isolation (150C for 1000 h.) 30-40 MPa
When the shift shock 50-80 kJ / m2
Recommended Use
Before using the adhesive in terms of production it is necessary to open the bottles with the components of a ventilation system for the release of the gas phase.
In order to achieve maximum efficiency in the use of acrylic adhesive, the working surfaces of parts to be cleaned and degreased with gasoline, toluene or acetone.
Components A and B are mixed, they are applied to various surfaces to be glued. Connect the parts and grind each other for 5-10 seconds.
Press surfaces towards each other and fixed for 2-3 minutes.
Safety requirements
Fire safety: Refers to a group of flammable substances.
Working conditions: ventilation. Overalls - in accordance with the "industry norms".
Near the place of work with products not allowed to have open fire
Hardened adhesive compound is non-toxic and non-flammable.
Disposal of unusable SanPin 2.1.7.1322-03 and SP 2.1.7.1386-03 products.
It is forbidden to drain the product into drains or wastewater.
Certification: The development of the material and its production is certified according to ISO 9001-2008 (ISO 9001: 2008). Certificate № ROSS RU.IF05.K00093.
Transport and Storage
Packing: Plastic bottles with a fill factor of the container 0.6.
Transportation (sort of): Rail, road, sea or air.
Be sure protection from sunlight. The temperature during transport from + 10 ° C to 30 ° C.
Storage Life and Conditions: Shelf life - 12 months. Acrylic composition should be stored in closed manufacturer's packaging in closed, dry, heated warehouse with the exclusion of moisture, dirt, dust and direct sunlight at temperatures between + 5 ° C to + 25 ° C.
The presence of metals, heat, solar radiation, causing spontaneous curing adhesive.
Acrylic adhesive for use and storage does not emit harmful substances in concentrations dangerous for the human body. Store away from foodstuffs.
PACKAGING: 100, 200 g